EA Combs SAW Series Wi-Fi Analog Clock
Wi-Fi Clocks represent the most up to date and cost effective solutions for any organisation to ensure accurate and reliable clock systems in any facility.
The EA Combs Sapling SAW Series Wi-Fi Clocks connect to a wireless local network and can take the accurate time from any NTP server. The Sapling Wi-Fi clocks come pre-programmed with the web addresses of public internet NTP servers. Each clock can be set and controlled through a user-friendly built-in web interface from any computer or mobile device (such as a tablet or smart phone).
Since Wi-Fi is the means of communication, Sapling Wi-Fi Clocks are ideal for facilities in need of many or just a few clocks spread far apart. It is also a great solution for multi-building campus environments utilising existing Wi-Fi infrastructure. The system also includes the Wi-Fi Monitoring Software to monitor the clocks.
EA Combs SAW Series Wi-Fi Analogue Clock Features
Built-In Web Interface – Each Wi-Fi clock has its own web interface, which allows the user to easily configure features such as 12/24 hour mode (digital clocks only), time zone offset, domestic and international Daylight Saving Time, etc.
Self-Diagnostics – Each clock can perform self-diagnostics to keep the user informed about the clock’s status.
Server Synchronisation Redundancy – Each Sapling Wi-Fi Clock stores up to 5 NTP server addresses to ensure synchronization even if one or more servers fails to communicate.
Master Clock Optional – As long as internet is reliable or an in-house NTP/SNTP time server is available, a master clock is optional since each clock can receive the time data directly from the NTP/SNTP time source. Otherwise, a master clock with a GPS receiver can be added to the system as an accurate time source.
Wi-Fi Monitoring Software – View, supervise, and configure email alerts with the Sapling Wi-Fi Monitoring Software to keep up to date with your Wi-Fi Clock System. In addition, the Wi-Fi Monitoring Software shows the battery level of each battery-operated analogue clock in the system.
Cost Efficiency – Since the clocks receive the time over the facility’s existing Wi-Fi infrastructure, there is no need to run wires between the secondary clocks, therefore greatly reducing installation and maintenance cost. EA Combs-Sapling’s Analogue and Digital Clocks are offered in 24V, 110 VAC, and 230 VAC. To further simplify installation, we also offer a battery-powered analog clock. A battery-powered clock can be installed by simply
inserting batteries into the clock and hanging it on the wall. Each battery operated analogue clock is powered by two D-Cell alkaline batteries, such as Duracell ProCell or Duracell Ultra, which can last between 5-7 years. Simply power the clocks, connect to your network, set, and go!
Safety Standard Compliance – Sapling Master Clocks and Secondary Clocks are designed to meet strict international safety standards and are (c)UL listed.